Tissue Cases
Home ] Up ]

Home
Up
Applique Sets
Bottle Aprons
Business Card Holders
Cell Phone Pouches
Chelsea's Fashion Designs
Ckbook & Calendar Sets
Christmas Designs
Clocks - Framed
Clocks - Round
Clock/Frame Sets
Coasters
Coin Purses
Combo Sets - Kitchen
Combo Sets - Purse
Credit Card Cases
Custom Sets
Embossed Designs
Eyeglass Cases
Flatware Holders
Flower Alphabet
Freebies
5x7 Frame Designs
5x7 Double Frames
5x7 Triple Frames
Large Frames
4x4 Mini Frames
Gift Card Holders
Hot Mitts
Key Fob Designs
Magnet Designs
Note Pad Holders
Party Favors
Purse Memo Cases
Recipe Holders
Seat Belt Wraps
Shirt Sets
Single Designs
Tissue Cases
Tote Bags
Favorite Links
Towel Trios
Projects Page
Customer Comments
Mail Order Form
Special Orders
Chelsea's Art

TISSUE CASES

Click on the link to see designs: 
Tissue Case Designs
Printing instructions: Click here

Supplies:
Tear away stabilizer to fit your hoop (I used Pellon Stitch 'n Tear)
Vilene or Aqua Magic wash away stabilizer
Cotton Fabric - 2 pieces cut 4" x 6"
Medium weight iron-on interfacing - 2 pieces cut 4" x 6" (iron to wrong side of fabric)
1.  Hoop tear away stabilizer to fit your hoop.  The first outline is sewn on the stabilizer only (no fabric yet) 2.  Cut 2 pieces of fabric 4" x 6" and 2 pieces of medium weight iron on interfacing (same size) and iron it to the wrong side of the fabric.
3. Place your fabric (with interfacing already ironed to back) centered over outline. 4.  The next color in the design tacks the fabric down and sews the underlay outlines for the tissue case opening.
5.  Next, stitch the embroidery design according to the instructions in the text file provided. 6. Remove hoop and trim the fabric and stabilizer from inside the narrow opening.
7.  Flip hoop over on back side and tape a strip of vilene wash away stabilizer 2" wide over the narrow opening.  Place hoop back on machine. 8.  The next color in the design stitches the satin border around the opening covering the raw edges of the fabric.
9.  Place the 2nd piece of fabric centered over the outline with the right sides of fabric facing each other. 10.  The last color in the design tacks the 2nd piece of fabric down.  (The outline will stitch twice)
11.  Remove hoop and flip over to back side.  Trim away the excess wash away stabilizer.  12.  With pinking shears, trim the excess fabric from around the tissue case. 
13.  Cut a slit through the opening through the wash away stabilizer.  Turn the design inside out through opening.   14.  Run a warm wet rag along the edge dissolve the remaining wash away stabilizer.  Let dry. 
Here is the finished tissue case with tissues inside!  Very easy to make!!
Note:  See the little circles inside the flower center and dragonfly wings?  This design was digitized with the little circles to add swarovski crystals for a little extra glitz!  Of course the design looks fine without them, it's up to you!
Go to www.designbydawn.com to order swarovski crystals.